1. Adımdaki Değişiklikler
Düzenleyen: Tate Morell —
Düzenleme onaylandı tarafından Tate Morell
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* red] Locate the LED on the arm of the drone in between the motor and the control board. | |
| [* orange] Follow the red,yellow and black wires from the LED to where they connect on the control board. | |
| - | [* black] Scrape off the glue with a plastic scraper. Use a metal tool if needed. |
| + | [* black] Scrape off the glue with a plastic opening tool. Use a metal opening tool if needed. |
| + | [* icon_note] The LED wires are smaller than the motor wires. |