DJI Phantom 3 Advanced Flight Controller Replacement 2 No'lu Adım Geçmişi

2. Adımdaki Değişiklikler

Düzenleyen: Tate Morell — 1 Kas 2016

Düzenleme onaylandı tarafından Tate Morell

-	[* black] Use a plastic ~~scraper~~ to remove the glue that covers the motor and LED wires. Use a metal one if necessary.
-	[* yellow] Desolder the 6 motor and LED wires on ~~each side of~~ the flight controller. Refer to the [guide\|750\|Desoldering Guide] on how to desolder.
+	[* black] Use a plastic opening tool to remove the glue that covers the motor and LED wires. Use a metal one if necessary.
+	[* yellow] Desolder the six motor and LED wires where they connect on the flight controller for each arm. Refer to the [guide\|750\|Desoldering Guide] on how to desolder.
	[* blue] Desolder the battery wires.