Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Aaron Morland

Düzenleme onaylandı tarafından Aaron Morland

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Remove the yellow tape that is adhered to the bottom of the motherboard.
+[* red] Disengage the camera connections and yellow tape by gently pulling up on the motherboard while holding the yellow tape and camera connections down.
+ [* icon_reminder] You will need to align the camera connections so they re-engage one another during reassembly.
[* icon_note] A black piece of tape covers the bottom of the motherboard. Do not remove the black tape from the motherboard, only the yellow tape from the black tape.
[* orange] Fold the motherboard toward you 180 degrees and set it down in the middle of the case.
[* icon_note] In this position, two ribbon cable ports covered by yellow tape should be visible on the motherboard.