Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: Aaron Morland

Düzenleme onaylandı tarafından Aaron Morland

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Peel back the yellow tape in the center of the motherboard to expose the ribbon cable to the charging port.
- [* icon_reminder] Leave the right hand have the yellow tape attached, as you will need to recover the connection during reassembly.
+ [* icon_reminder] Leave the right hand side of the yellow tape attached, as you will need to recover the connection during reassembly.
[* black] Lift the tan tab on the back of the ribbon cable port upward 90 degrees with a narrow plastic prying tool.
[* black] Pull the ribbon cable out of the port, freeing it from the motherboard.