1. Adımdaki Değişiklikler
Düzenleyen: Ryan Williams —
Düzenleme onaylandı tarafından Ryan Williams
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Locate the battery and use the metal spudger tool to lift the battery from the panel. |
|---|---|
| + | [* black] Use a metal spudger to pry the battery from its section of the device. Do not worry about damaging any of the adhesive on its underside. |
| + | [* icon_caution] Use only the flat end of the metal spudger when removing the battery. Make sure that you do not puncture the battery during removal. |
| + | [* icon_reminder] During reassembly, if the battery did not come with an adhesive to hold it down, place double-sided electrical tape under the battery before pressing it into its slot. |