Eşyalarını Tamir Et Topluluk Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Ryan Williams —

Düzenleme onaylandı tarafından Ryan Williams

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Use a metal spudger to pry the battery from its section of the device. Do not worry about damaging any of the adhesive on its underside.
-[* icon_caution] Use only the flat end of the metal spudger when removing the battery. Make sure that you do not puncture the battery during removal.
-[* icon_reminder] During reassembly, if the battery did not come with an adhesive to hold it down, place double-sided electrical tape under the battery before pressing it into its slot.
+[* black] Use a metal spudger to pry the battery from the device.
+[* icon_caution] Use the flat end of the metal spudger when removing the battery to avoid puncturing the battery.
+[* icon_reminder] During reassembly, place double-sided electrical tape under the battery before pressing it into its slot.