Google Home Teardown 5 No'lu Adım Geçmişi

5. Adımdaki Değişiklikler

Düzenleyen: Evan Noronha — 4 Kas 2016

Düzenleme onaylandı tarafından Evan Noronha

	[* black] We turn up the heat on this teardown and bust out some enhanced interrogation tools—an iOpener and [product\|IF145-059-4\|dental pick\|new_window=true] to be exact.
	[* black] There is some seriously serious adhesive holding this board to the upper case, and the transparent portions of the case give us a hint as to why.
-	[* black] The touch sensing top panel seems to actually be a series of sensors that maybe operate when your finger blocks them or something. Look into that. Anyway, probably needs a solid seal. Still, boo adhesive.
+	[* black] With a final yank (and a healthy dose isopropyl alcohol to dissolve the oodles of glue) the LED board comes free to reveal the source of our struggle: a ton of adhesive tape.
+	[* icon_note] We're not fans of glue where screws would be just as effective, but we're happy to see that this component can reasonably go back in the upper case without having to apply new glue..