Midiman Oxygen 8 Backplate Disassembly 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Scott Miller — 29 Kas 2016

Düzenleme onaylandı tarafından Scott Miller

	[* red] *These are the back plate screw locations*
-	[* ~~black~~] They are each, 8mm long M3 phillips head self tapping machine screws.
-	[* ~~black~~] Several of the screws are in narrow, deep sockets, make sure to use an appropriate screw driver to remove them so as not to damage the cover during removal. ~~Remove the back plate screws, the order is irrelevant, and all 13 screws are the same~~
-	[* black] ~~Count:~~13
+	[* red] They are each, 8mm long M3 phillips head self tapping machine screws.
+	[* icon_caution] Several of the screws are in narrow, deep sockets, make sure to use an appropriate screw driver to remove them so as not to damage the cover during removal.
+	[* black] Remove the back plate screws, the order is irrelevant, and all 13 screws are the same