Midiman Oxygen 8 Backplate Disassembly 1 No'lu Adım Geçmişi

1. Adımdaki Değişiklikler

Düzenleyen: Maegan OBrion — 22 Ağu 2017

Düzenleme onaylandı tarafından Maegan OBrion

-	[* red] Remove the ~~8mm long~~ M3 Phillips head self tapping machine screws.
-	[* icon_caution] Several of the screws are in narrow, deep sockets, make sure to use an appropriate screw driver to remove them so as not to damage the cover during removal.
-	[* black] Remove the back plate screws~~, the order is irrelevant, and all 13 screws are the same~~
+	[* red] Remove the 8 mm M3 Phillips head self tapping machine screws.
+	[* icon_caution] Several of the screws are in narrow, deep sockets; make sure to use an appropriate screw driver to remove them so as not to damage the cover during removal.
+	[* black] Remove all 13 of the back plate screws.