3. Adımdaki Değişiklikler
Düzenleyen: Alexander Heitzman —
Düzenleme onaylandı tarafından Alexander Heitzman
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* black] ***Removal of Ribbon Cables*** |
|---|---|
| + | [* black] Prior to removal, note, mark, or take photo’s of the position of all connectors, specifically note the side that the red wire is on, as ribbon cables are polarized cables that must be installed correctly. installing the cables backwards may cause damage to the device or significantly hinder the troubleshooting process. |
| + | [* black] There are five cables that connect to the motherboard but are not originating from the back plate; the key assembly, LCD circuit, rotor tuning circuit, and the pitch and modulator circuits. All 5 must be removed in order to separate the back plate. None of these cables require tools to remove, simply apply firm upward pressure to remove them. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi