11. Adımdaki Değişiklikler
Düzenleyen: Jeff Suovanen —
Düzenleme onaylandı tarafından Jeff Suovanen
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| + | [* icon_reminder] Whether installing a replacement display assembly or re-using the existing display assembly, note the following: |
|---|---|
| + | [* black] Carefully straighten the digitizer and LCD data cables, and feed them through the slot cut in the outer case. The first photo shows the display assembly being installed ***incorrectly***, with a fold in the digitizer cable. |
| + | [* icon_note] The second and third photos show the digitizer cable being correctly fed through to its full length. |
| + | [* icon_caution] If the digitizer cable has been installed incorrectly, it will not reach its socket on the logic board. ***Do not*** attempt to pull it through by force, or it will tear. Remove the display assembly, straighten the cable, and feed it through correctly. |
Resim 1
Önceki resim yok
Eklendi
Resim 2
Önceki resim yok
Eklendi
Resim 3
Önceki resim yok
Eklendi