Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

1. Adımdaki Değişiklikler

Düzenleyen: Walter Galan —

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the five cables near the top of the logic board in the following order:
[* red] Headphone jack/volume button cable
[* orange] Power button cable
[* yellow] Front facing camera cable
[* greenyellow] Digitizer cable
[* bluegreen] Display data cable
[* blue] Power button cable (located underneath the headphone jack/volume button cable as shown in the second picture.)
[* blackicon_note] To disconnect the cables, use the edge of a plastic opening tool to gently lift their connectors up and out of the sockets on the logic board.
[* orange] Power button cable
[* yellow] Front facing camera cable
[* greenyellow] Digitizer cable
[* bluegreen] Display data cable
[* blue] Power button cable (located underneath the headphone jack/volume button cable as shown in the second picture.)
[* blackicon_note] To disconnect the cables, use the edge of a plastic opening tool to gently lift their connectors up and out of the sockets on the logic board.
[* icon_caution] Be careful not to break any of the small and delicate surface mount components as you disconnect the cables.

Resim 1

Eski Sürüm

Yeni Sürüm

Resim 2

Eski Sürüm

Yeni Sürüm