Eşyalarını Tamir Et Topluluk Mağaza

6. Adımdaki Değişiklikler

Düzenleyen: Walter Galan —

Düzenleme onaylandı tarafından Walter Galan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] If present, peel the piece of black tape covering the hidden screw near the power button.
[* red] Remove the 2.6 mm Phillips screw securing the logic board near the power button.
[* black] (Use caution when removing this screw and removing the power contact held by it; the contact tab will come loose with the screw)
-[* black] Notice the small rubber bumper under the screen & digitizer cables (which are detached at top above the Q-code). This bumper can fall off of the logic board when removed or get stuck to the cables and fall off later. Mentioned in step 8.
+[* icon_note] Notice the small rubber bumper under the screen & digitizer cables (which are detached at top above the Q-code). This bumper can fall off of the logic board when removed or get stuck to the cables and fall off later.