Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

6. Adımdaki Değişiklikler

Düzenleyen: Yves

Düzenlenme reddedildi tarafından Taylor Dixon

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] If present, peel the piece of black tape covering the hidden screw near the power button.
[* red] Remove the 2.6 mm Phillips screw securing the logic board near the power button. This screw is not visible in the red square are of the picture.
[* red] Remove the 2.6 mm Phillips screw securing the logic board near the power button. This screw is not visible in the red square are of the picture.
[* icon_caution] (Use caution when removing this screw and removing the power contact held by it; the contact tab will come loose with the screw)
[* icon_note] Notice the small rubber bumper under the screen & digitizer cables (which are detached at top above the Q-code). This bumper can fall off of the logic board when removed or get stuck to the cables and fall off later.