| - | [* black] Remove these two screws that are securing the battery connecter to the Logic Board. |
|---|
| - | [* icon_caution] Remember to focus and pay attention. So you don't accidentally slip and pierce the Battery! |
|---|
| - | [* icon_note] For the bottom screw, it is recommended that you use a 1.5 mm Screwdriver, and a 1.7 mm for the top screw. |
|---|
| + | [* black] Remove these two screws that are securing the battery connector to the Logic Board. |
|---|
| + | [* icon_caution] Beware of unscrewing the battery connector, as your screwdriver does have the possibility to slip and pierce the battery. |
|---|
| + | [* icon_note] For the bottom screws, it is recommended that you use a 1.5 mm screw bit, and a 1.7 mm for the top screw. |
|---|