Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Miroslav Djuric

Düzenleme onaylandı tarafından Miroslav Djuric

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use a power sander with a low-grit sand paper to strip the old paint off the surface of your vehicle. Use a sanding block or just the sand paper to reach small or hard-to-get places.
[* black] Typically,Make the first pass with at least 100 grit, possibly even as low as 40 grit sand papersandpaper. Coarser grits will remove the paint very efficiently. However, this willefficiently, but leave a very rough finish. It is recommended that you use 40 grit sand paper
[* black] Make a second pass with finer sandpaper (200 grit),
to doreduce the initial paint stripping,scratches and then use a higher grit sand paper (at least 120) to achieve a smooth finish. The higherout the sand paperbody.
[* black] Repeat the procedure with 400, 800, and 1500
grit number,sandpaper to make the smoother the finishcar's surface super-smooth. Spend a good amount of time with each grit, as it will bebe much harder to remove the deep scratches down the line.
[* black] Typically,Make the first pass with at least 100 grit, possibly even as low as 40 grit sand papersandpaper. Coarser grits will remove the paint very efficiently. However, this willefficiently, but leave a very rough finish. It is recommended that you use 40 grit sand paper
[* black] Make a second pass with finer sandpaper (200 grit),
to doreduce the initial paint stripping,scratches and then use a higher grit sand paper (at least 120) to achieve a smooth finish. The higherout the sand paperbody.
[* black] Repeat the procedure with 400, 800, and 1500
grit number,sandpaper to make the smoother the finishcar's surface super-smooth. Spend a good amount of time with each grit, as it will bebe much harder to remove the deep scratches down the line.
[* black] Wipe off the sanding dust occasionally to help speed the sanding process.