Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Miroslav Djuric

Düzenleme onaylandı tarafından Miroslav Djuric

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Paint your car!Make a mixture of 50% Rustoleum paint, and 50% mineral spirits. The paint will be very, very thin.
[* blackicon_caution] If you are using a brush or roller styleover-apply the paint, followit will run down the instructions for paint mixing (if desired or necessary), poursides! Over-applying the paint will negate all the hard work you put into a container and apply in light even strokes.
[* black]
prepping the car for painting. If you are using spray paint orit happens, use a paint gun, apply paint in light even coats. Make passes at a steady speed acrossrag doused with pure mineral spirits to wipe off the surfaceruns.
[* black] Apply several thin coats
of paint onto the part you are painting at a distance ofcar. Wait approximately 1'30 minutes between each coat to 3' away.
[* black] When painting, it is recommended that you
allow the paint in multipleto partially dry.
[* icon_note] You will probably have to apply at least five
thin coats untilof paint before the base colorbody (especially the Bondo areas) are no longer shows through. Allow sufficient drying time between coats to prevent cracking or runny spots. Lighter colors will typically require more coats to covervisible. Don't rush, and don't over-apply the base colorpaint.
[* black] Paint your car!Make a mixture of 50% Rustoleum paint, and 50% mineral spirits. The paint will be very, very thin.
[* blackicon_caution] If you are using a brush or roller styleover-apply the paint, followit will run down the instructions for paint mixing (if desired or necessary), poursides! Over-applying the paint will negate all the hard work you put into a container and apply in light even strokes.
[* black]
prepping the car for painting. If you are using spray paint orit happens, use a paint gun, apply paint in light even coats. Make passes at a steady speed acrossrag doused with pure mineral spirits to wipe off the surfaceruns.
[* black] Apply several thin coats
of paint onto the part you are painting at a distance ofcar. Wait approximately 1'30 minutes between each coat to 3' away.
[* black] When painting, it is recommended that you
allow the paint in multipleto partially dry.
[* icon_note] You will probably have to apply at least five
thin coats untilof paint before the base colorbody (especially the Bondo areas) are no longer shows through. Allow sufficient drying time between coats to prevent cracking or runny spots. Lighter colors will typically require more coats to covervisible. Don't rush, and don't over-apply the base colorpaint.