Ubiquiti UniFi AP AC Lite TVS Diode Replacement Adım Geçmişi

Bu Adımdaki Değişiklikler

Düzenleyen: Yang Zhao — 21 Kas 2016

Düzenleme onaylandı tarafından Yang Zhao

	[title] Open the UAP-AC-LITE
	[* red] The front cover is secured by 5 tabs.
-	[* black] ~~Insert~~ the Jimmy in the space near a clip, and create a big enough gap to insert a prying tool. Moderate pressure should force the clips open.
+	[* black] Work the Jimmy into the space near a clip, and create a big enough gap to insert a prying tool. Moderate pressure from a prying tool should force the clips open.
	[* black] There are a number of alignment tabs that can get in the way. It is best to try and work the Jimmy towards the center of the front cover, hugging its inside surface.
	[* black] The PCB is held down by 3 screws. It is not necessary to remove the board for this repair.