Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use a coffee filter or a lint-free cloth withand a drop of ArctiClean Thermal Material Remover tolittle isopropyl alcohol (a.k.a. IPA, 90% concentration or greater) to clean the thermal paste residue off the thermal contact surface of your heat sink.
[* icon_note] Instead of IPA, you may also use a dedicated cleaning agent, such as ArctiClean Thermal Material Remover.

[* black] Once the surface is clean, use a newfresh piece of coffee filter or cloth to applyand a drop of ArctiClean Thermal Surface Purifierlittle more IPA to remove any oils and prepare the surface.
[* black] Use a coffee filter or a lint-free cloth withand a drop of ArctiClean Thermal Material Remover tolittle isopropyl alcohol (a.k.a. IPA, 90% concentration or greater) to clean the thermal paste residue off the thermal contact surface of your heat sink.
[* icon_note] Instead of IPA, you may also use a dedicated cleaning agent, such as ArctiClean Thermal Material Remover.

[* black] Once the surface is clean, use a newfresh piece of coffee filter or cloth to applyand a drop of ArctiClean Thermal Surface Purifierlittle more IPA to remove any oils and prepare the surface.
[* black] Do not touch either the chip or the heatsink, or allow any dust or debris to get on them. Even a fingerprint can be a major obstacle to thermal transfer on a chip.
[* black] Allow the heat sink(s) to dry completely!