Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: Nicholas Ouimet

Düzenlenme reddedildi tarafından Walter Galan

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Use a coffee filter or a lint-free cloth with a drop of ArctiClean Thermal Material RemoverRemover/citrus based cleaner (Goo Gone) to clean the thermal paste residue off the thermal contact surface of your heat sink.
[* black] Use a coffee filter or a lint-free cloth with a drop of ArctiClean Thermal Material RemoverRemover/citrus based cleaner (Goo Gone) to clean the thermal paste residue off the thermal contact surface of your heat sink.
[* black] Once the surface is clean, use a new coffee filter or cloth to apply a drop of ArctiClean Thermal Surface Purifier to remove any oils and prepare the surface.
[* black] Alternatively you can use 91% isopropyl alcohol or acetone instead of a two part solution like ArctiClean. These solvents will clean off remaining residue and clean the surface.
[* black] Do not touch either the chip or the heatsink, or allow any dust or debris to get on them. Even a fingerprint can be a major obstacle to thermal transfer on a chip.
[* black] Allow the heat sink(s) to dry completely!