Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

7. Adımdaki Değişiklikler

Düzenleyen: KelAt

Düzenleme onaylandı tarafından Andrew Optimus Goldheart

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Wrap the tip of your index finger with a piece of plastic (such as a sandwich bag or Saran wrap).
[* black] Dispense a very small amount of thermal paste onto processor core(s).
[* black] Use your finger to gently smear the thermal paste over the entire processor core(s).
[* icon_note] If you accidentally apply a small amount of thermal paste on the green surface of the processor, it will not cause any harm.
[* black] The processor(s) is now ready for heat sink installation.
[* icon_note] You do not need to apply any thermal paste on the heat sink(s)sink(s), although [http://www.arcticsilver.com/methods.html|Arctic Silver gives instructions] on "tinting" the heat sink to reduce the break-in time of the thermal compound.
[* icon_note] You do not need to apply any thermal paste on the heat sink(s)sink(s), although [http://www.arcticsilver.com/methods.html|Arctic Silver gives instructions] on "tinting" the heat sink to reduce the break-in time of the thermal compound.

Resim 1

Önceki resim yok

Eklendi