How to Apply Thermal Paste 7 No'lu Adım Geçmişi

7. Adımdaki Değişiklikler

Düzenleyen: James — 23 Haz 2010

	[* black] Wrap the tip of your index finger with a piece of plastic (such as a sandwich bag or Saran wrap).
-	[* black] Dispense a very small amount of thermal paste onto processor core(s).
+	[* black] Dispense a very small amount of thermal paste onto processor core(s). Note: Thermal paste (or grease) is use to fill in the air gap between two surfaces. Because no two surfaces are perfectly flat current technology still requires just a thin amount. More is not better here. Use just enough to cover the processor.
	[* black] Use your finger to gently smear the thermal paste over the entire processor core(s).
	[* icon_note] If you accidentally apply a small amount of thermal paste on the green surface of the processor, it will not cause any harm.
	[* black] The processor(s) is now ready for heat sink installation.
	[* icon_note] You do not need to apply any thermal paste on the heat sink(s).