Ana içeriğe geç

7. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] To apply new thermal paste, [http://www.arcticsilver.com/methods.html|use the application method recommended for your specific processor type|new_window=true]—vertical line, horizontal line, middle dot, or surface spread.
[* black] If you're using the surface spread method:
[*
black] Wrap the tip of your index finger with a piece of plastic (such as a sandwich bag or Saran wrap).
[*

[*
black] Dispense a very small amount of thermal paste onto processor core(s).
[*

[*
black] Use your finger to gently smear the thermal paste over the entire processor core(s).
[* black] To apply new thermal paste, [http://www.arcticsilver.com/methods.html|use the application method recommended for your specific processor type|new_window=true]—vertical line, horizontal line, middle dot, or surface spread.
[* black] If you're using the surface spread method:
[*
black] Wrap the tip of your index finger with a piece of plastic (such as a sandwich bag or Saran wrap).
[*

[*
black] Dispense a very small amount of thermal paste onto processor core(s).
[*

[*
black] Use your finger to gently smear the thermal paste over the entire processor core(s).
[* icon_note] If you accidentally apply a small amount of thermal paste on the green surface of the processor, it will not cause any harm.
[* black] The processor(s) is now ready for heat sink installation.
[* icon_note] You do not need to apply any thermal paste on the heat sink(s), although [http://www.arcticsilver.com/methods.html|Arctic Silver gives instructions] on "tinting" the heat sink to reduce the break-in time of the thermal compound.