Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Phillip Takahashi

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert the flat end of a spudger into the slot on the right side of the Center Control Cover and pry it up.
-[* black] Carefully pull the center control cover up along its edges.
+[* black] Insert the flat end of a spudger into the slot on the right side of the central control cover and pry it up.
+[* black] Carefully pull the central control cover up along its edges.
[* icon_caution] Do not attempt to completely remove the cover, as it is still attached via a ribbon cable.