Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Joshua Carberry

Düzenleme onaylandı tarafından Joshua Carberry

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert the plastic opening tool into the outer casing.
-[* black] Pry upwards until the top casing separates from the bottom casing.
+[* black] Insert the plastic opening tool into the seam between the palm rest and the laptop.
+[* black] Pry upwards until the palm rest separates from the laptop.
[* black] Repeat this process around the entire computer.
-[* icon_note] These steps will be similar to the ones taken to remove the keyboard. Again, you will hear snapping noises.
+[* icon_note] These steps will be similar to the ones you took to remove the keyboard. Again, you will hear snapping noises.