Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: Daniel Matheson

Düzenleme onaylandı tarafından Daniel Matheson

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] After putting the plastic cover to the side we must locate the two screws holding the keyboard to the laptop.
-[* black] At this point we will remove the screws using the P0 or J0 screw bit and place to the side for further use.
+[* black] Remove the screws using the Phillips #0 screwdriver, and place the screw on the magnetic board.