Ana içeriğe geç

3. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* icon_note] The front brake lines are attached to the body by a small bracket near the strut.
[* black] Grab the front edge of the bracket with a pair of locking pliers.
- [* icon_note] Without the locking pliers to hold it in place, the bracket will twist back and forth, which could fracture the hard brake lines.
-[* red] Loosen and remove the 12 mm bolt that holds the bracket in place with a socket wrench..
+ [* icon_note] Without the locking pliers to hold the bracket in place, it may twist back and forth. This twisting could fracture the rigid brake lines.
+[* red] Remove the 12 mm bolt that holds the bracket in place with a socket wrench.