Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Insert wisdom here.
+[* icon_note] The steering knuckle is held to the control arm by a single bolt.
+[* red] Place a breaker bar with an 18 mm socket over the nut on the bottom of the control arm.
+ [* icon_note] The breaker bar alone will not be able to loosen the nut, since the bolt is free to rotate.
+[* black] Place an 18 mm box end wrench over the bolt on top of the control arm.
+[* black] Turn the breaker bar and the wrench in their respective counterclockwise directions to loosen and remove the knuckle-to-control arm bolt.