Ana içeriğe geç

13. Adımdaki Değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Locate the IR sensor located behind the black Apple logo.
-[* icon_note] If necessary, peel the tape covering the IR sensor.
-[* black] Remove the IR sensor by pulling it straight up and out of the case.
-[* icon_caution] Do not attempt to completely remove the IR sensor from the case as it is still attached to the logic board.
+[* icon_note] If necessary, peel back the tape covering the IR sensor.
+[* black] Detach the IR sensor by pulling it straight up and out from the case.
+[* icon_caution] Do not attempt to completely remove the IR sensor from the iMac as it is still attached to the logic board.