Ana içeriğe geç

16. Adımdaki Değişiklikler

Düzenleyen: Pierre Christen

Düzenleme onaylandı tarafından Evan Noronha

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Locate the secondary SATA socket, next to the primary SATA socket.
[* black] Plug in the included SATA data/power cable.
[* icon_note] The hard drive cable side with only one connector goes into the logic board connector.
+[* icon_note] You might need to swap the SATA connectors around, so that your new SSD is connected to the HDD SATA-3 connector. The spare (free) connector seems to be limited to SATA-2 which is plenty for the HDD or the Optical.