Ana içeriğe geç

17. Adımdaki Değişiklikler

Düzenleyen: Phillip Takahashi

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Route the new SATA cable through the indentation that the primary SATA cable goes through and into the optical drive bay.
-[* black] Set the logic board back into place, being careful not to catch, cover, or pinch any wires.
+[* black] Set the logic board back into place, being careful not to catch, cover, or pinch any cables.
[* icon_note] Be sure that the SATA cable has as much slack as possible and that it is not tangled with any other cables.