5. Adımdaki Değişiklikler
Düzenleyen: Michal —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Step 5 is about removing the cover which protects the processor from any outside damage | |
| [* black] The cover is attached to four pins. In order to remove the cover, it has to be pulled towards the left. | |
| - | [* black] CAUTION: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin |
| + | [* black] ++CAUTION++: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin |
| [* black] It can also be pushed from the inside (by lifting the bottom of the cover first) (see image 3) |