(Windows) Installing a HP LaserJet Printer using the HP UPD 4 No'lu Adım Geçmişi - iFixit

4. Adımdaki Değişiklikler

Düzenleyen: Nick — 17 Mar 2023

Düzenleme onaylandı tarafından Nick

: Önce
: Sonra
: Değiştirilmemiş

Adım Satırları

	[title] Driver installation (Dynamic mode)
	[* icon_reminder] This installation method only works with networked printers. *USB IS NOT SUPPORTED.*
	[* red] After the driver loads, agree to the license.
	[* orange] Once you agree to the license, you will be asked which installation mode you want to use. Select *Dynamic Mode* and click *Next*.
	[* yellow] After selecting *Dynamic Mode, click Next*. The printer driver will be installed, as well as a universal printer.
-	[* green] Once the driver is installed, *~~manual~~ IP address ~~configuration~~ is required, ~~and it must be static~~.* ~~Your~~ printer ~~will need to be~~ configured ~~using the assigned~~ IP address.
+	[* green] Once the driver is installed, *a static IP address is required, as well as manual driver configuration.* The printer is configured via IP address with this setup.