Eşyalarını Tamir Et Topluluk Mağaza

7. Adımdaki Değişiklikler

Düzenleyen: Nick —

Düzenleme onaylandı tarafından Nick

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Manual Setup - Printer configuration
-[* icon_caution] ***Manual configuration is required when using the HP UPD to replace failing legacy drivers.*** These older printers can use "USB_001" or "DOT4" depending on the age of the machine you have. ***(IMPORTANT: most of the older bulletproof models like the 1012, 1200, 4200 and 4300 series are old enough to require "DOT4")***
+[* icon_caution] ***Manual configuration is required when using the HP UPD to replace failing legacy drivers on printers setup using a USB cable.*** These older printers use "USB_001" or "DOT4" depending on the age of the printer. ***(IMPORTANT: most of the older bulletproof models like the 1012, 1200, 4200 and 4300 series are old enough to require "DOT4")***
[* red] Find ***Devices and Printers***. The location will vary based on what version of Windows is installed. ***Search for Control panel and find Devices and Printers.***
[* orange] Click ***Add a Printer***. If your printer uses USB, select ***Add a Local printer***. For networked printers, select ***Add a Network, Wireless, or Bluetooth printer***.
[* yellow] Allow your computer to populate the driver list. Find ***HP*** and then locate the driver that says ***HP Universal Printing (PCL6/PostScript)***. Select the driver and click ***Next.***
[* green] Name your printer, then click ***Next.***