Eşyalarını Tamir Et Topluluk Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Kevin Leuthold —

Düzenleme onaylandı tarafından Kevin Leuthold

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] After you remove the outer plate, the hard drive should be immediately visible in a casing that looks like this. The two screws that are located in the circles are all you need to remove to gain access to the hard drive. These will also require a Phillips #1 Screwdriver and are 3mm long.
+[* red] To unfasten the hard drive's casing, there are two 3mm screws that you need to undo circled above. These screws require a Philips #1 screwdriver.