Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Nate Tippery

Düzenleme onaylandı tarafından Nate Tippery

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Pull the cable straight out from the connector to disconnect it.
[* icon_reminder] To reinstall the cable, hold it near the end and push it straight into the connector, being careful not to kink the cable.
-[* black] Push the each side of the sliding connector using the tip of a spudger carefully.
+[* black] Push each side of the sliding connector using the tip of a spudger carefully.
[* black] Repeat previous step for bottom part of the sliding connector.