Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: Ron Davis

Düzenleme onaylandı tarafından Ron Davis

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* icon_caution] Detach plastic clips (5). You need to run a plastic opening tool along the underside of the top half and you will hear the 'clicks' of the clips coming undone. Note: top plastic is fragile. Also Note: There are two miniature LEDs "exposed" in the top edge of the bottom casing, at bottom right. Be very careful not to damage these with your tool.
-[* black] Remove plastic covering
+[* black] Using a plastic opening tool, carefully detach the five plastic clips securing the upper case.
+[* icon_caution] There are two small LEDs in the top edge of the lower casing, near the bottom right of the laptop. Be careful not to damage them as you pry open the plastic clips.
+[* black] Carefully lift the upper case and flip it towards the front of the laptop.