Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Ron Davis

Düzenleme onaylandı tarafından Ron Davis

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove hard drive by carefully pulling to the left by the black plastic ribbon attached to the drive encasing, then ease up on the left and out.
-[* black] Be careful when re-inserting that the WiFi antenna cable (visible as a black loop below the disk in the 2nd photo) is not trapped under the leg of the drive encasing.
+[* black] Carefully slide the hard drive away from its socket.
+[* black] Use the attached pull tab to lift the hard drive up and out of the case.
+[* icon_reminder] When reinstalling the hard drive, be sure that the WiFi antenna cable (visible as a black loop below the disk in the 2nd photo) is not trapped or pinched beneath the drive.