Eşyalarını Tamir Et Topluluk Mağaza

10. Adımdaki Değişiklikler

Düzenleyen: Lucy Wiswall —

Düzenleme onaylandı tarafından Lucy Wiswall

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* red] Place blocks under the gate panel, about two inches in height, which will support the gate as we install the hinges.
-[* black] Lift the gate panel into position so that the gate is ligned up with the fence, at the correct height. Adjust the blocks as necessary to achieve the desired height.
+[* black] Place blocks on the ground at the location where the gate panel is to be installed. These will support the gate while you are connecting the hinges.
+[* black] Lift the gate panel into position so that the gate is lined up with the fence and at the desired height. Adjust the blocks as necessary to achieve the desired height.