Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Robert Backhaus

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Insert the handle end of the 2mm hex screwdriver (I am using an allen key)key into the hole left in step one. You may have to wiggle it around until it fits into the concealed bolt. Unscrew it counter-clockwize 18 turns. If you do it more than that, a piece will fall out inside the case, but it is no problem to screw it back on.
[* black] Insert the handle end of the 2mm hex screwdriver (I am using an allen key)key into the hole left in step one. You may have to wiggle it around until it fits into the concealed bolt. Unscrew it counter-clockwize 18 turns. If you do it more than that, a piece will fall out inside the case, but it is no problem to screw it back on.
[* black] The internals will now easily slide out of either end of the case.