Ana içeriğe geç

4. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Remove the cap from the Power Bleeder tank and fill the tank with two quarts of brake fluid.
[* black] Replace the Power Bleeder cap and tighten it fully.
[* black] Pressurize the system to a level between 15 and 20 psi.
- [* icon_note] Our race-ready Volvo is equipped with high-strength stainless steal brake hoses and racing brake fluid, which can handle significantly higher pressures than rubber hoses and standard fluid.
+ [* icon_note] Our race-ready Volvo is equipped with high-strength stainless steal brake hoses and racing brake fluid, which can handle significantly higher pressures than rubber hoses and conventional hydraulic fluid.
[* icon_caution] Never exceed 20 psi when pressurizing the Power Bleeder. Doing so may damage your hydraulic brake system.