Ana içeriğe geç

5. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Begin the bleeding procedure at the driver side rear brake caliper.
-[* icon_note] You may jack up each corner of the car one-by-one and remove the wheel, but you may find it easier to jack all four corners at once and take the wheels off.
+[* icon_note] Begin the bleeding procedure at the driver side rear brake caliper.
[* black] Attach an open end of the bleed tube to the bleed valve on the brake caliper.
[* black] Place the other end of the bleed valve in a suitable container, such as a bottle or drain pan.
[* icon_caution] Brake fluid is highly corrosive. Take caution not to spill it when bleeding the brakes.