Ana içeriğe geç

6. Adımdaki Değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* black] Use an 8 mm open end wrench to loosen the bleed screw on the caliper.
[* black] Brake fluid will begin to flow through the bleed tube with many air bubbles. Once the air bubbles stop completely, tighten the bleed screw to close the bleed valve.
[* black] Repeat steps 5 and 6 for the other three brake calipers, moving to passenger rear, driver front, and finally passenger front.
+ [* icon_note] As more fluid flows through the hydraulic system, you may need to pump additional pressure into the tank.