Instax Mini 90 Photo Flash Capacitor Replacement 4 No'lu Adım Geçmişi

4. Adımdaki Değişiklikler

Düzenleyen: Jonathan Stoll — 18 Nis 2017

Düzenleme onaylandı tarafından Jonathan Stoll

	[* black] Remove the metal loops that anchor the strap to the camera. There is one on the top of the camera, and one on the bottom.
	[* black] Use the black spudger to pry off the silver casing on the top and the bottom of the camera.
	[* black] Open up the camera by releasing the latches on the top and bottom of the camera with the black spudger. There are 2 latches on top, and 2 on the bottom.
+	[* black] Remove the metal piece from which the film is ejected located on the right side of the camera. There is one screw underneath it that must be removed.
+	[* black] Open up the camera by releasing the latches on the top and bottom of the camera with the black spudger. There are 2 latches on top and 2 on the bottom. Once the two halves of the camera are unhooked, you can easily pry open the camera with your hands.