Eşyalarını Tamir Et Topluluk Mağaza

4. Adımdaki Değişiklikler

Düzenleyen: Nathan —

Düzenleme onaylandı tarafından Nathan

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Remove the metal loops that anchor the strap to the camera. There is one on the top of the camera, and one on the bottom.
[* black] Use the black spudger to pry off the silver casing on the top and the bottom of the camera.
-[* black] Open up the camera by releasing the latches on the top and bottom of the camera with the black spudger. There are 2 latches on top, and 2 on the bottom.
-[* black] Remove the metal piece from which the film is ejected located on the right side of the camera. There is one screw underneath it that must be removed.
+[* black] Remove the anchors that hold the strap to the body of the camera. There is one on top, and one on the bottom.
+[* black] Remove the metal piece from which the film is ejected located on the right side of the camera. There is a 4.75 mm screw under the metal piece. Use a Phillips #000 screw driver to remove it.
[* black] Open up the camera by releasing the latches on the top and bottom of the camera with the black spudger. There are 2 latches on top and 2 on the bottom. Once the two halves of the camera are unhooked, you can easily pry open the camera with your hands.