Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Dillon Frank —

Düzenleme onaylandı tarafından Dillon Frank

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] When the canopy is removed from the lamp, lift the broken support off. You may now access the wires from the top.
-[* red] Save these, as they could come in use for rebuild.
+[* black] When the canopy is removed from the lamp, lift the broken support off. The wires should now be accessible from the top.
+[* red] Save these pieces, as they might be useful in reassembly.
[* icon_note] This old lamp had crimp on wire nuts, which I cut out with wire cutters. Remove the small cover at the base and save it for reassembly.
-[* orange] Mark the positive wire on the main power cord, this can be done with a marker, tape, or most any other method.
-[* icon_note] The main power cord will usually be the color of the lamp, but can be identified by the white wires on the light fixtures.
+[* orange] Mark the positive wire on the main power cord; this can be done with a marker, tape, or most any other method.
+[* icon_note] The main power cord will usually be the same color as the lamp, but can be identified by white wires on the light fixtures.