Bu Adımdaki Değişiklikler
Düzenleyen: robert.oliver6 —
Düzenleme onaylandı tarafından robert.oliver6
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* black] Unplug the lens’ circuit board from the mother board, use tweezers if necessary. There is also a small ribbon cable which can be removed by sliding the small black holder in a up right position and then sliding the cable out carefully. |
|---|---|
| + | [* black] The small ribbon cable can be removed by flipping the small black holder into the upright position and then sliding the cable out carefully. |
| + | [* black] Once this has been done, unplug the lens’ circuit board from the mother board using tweezers. |