Ana içeriğe geç

14. Adımdaki Değişiklikler

Düzenleyen: Kirill

Düzenleme onaylandı tarafından Kirill

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Disconnect Mother Board (part 2)
[* red] Disconnect WiFi antenna cable. Very gently pry it off!
[* yellow] Disconnect 2 camera lens flex circuits in the right bottom corner of the mother board. No latches here!
-[* black] Lift masking tape away from the mother board. Mostly likely your masking tape is going to be black not red!
+[* black] Lift masking tape away from the mother board. Most likely your masking tape is going to be black not red!
[* blue] Disconnect 2 more flex cables. One of those is power flex circuit and the other one is either flash or buttons flex circuit.