Ana içeriğe geç

15. Adımdaki Değişiklikler

Düzenleyen: Kirill

Düzenleme onaylandı tarafından Kirill

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Disconnect Mother Board (part 3)
-[* red] Disconnect shutter flex cable from the mother board. No latch here. Gently pry it off! I bet you are master at disconnecting those off by now!
+[* red] Disconnect shutter flex cable from the bottom side of the mother board. No latch here. Gently pry it off! I bet you are master at disconnecting those off by now!
[* yellow] Make sure that both microphones and speaker is out of the camera body at this point.
[* blue] Disconnect one more flex circuit connected to the bottom of the mother board. No latch here. It is either flash or buttons flex circuit.
[* black] Remove mother board