Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Richard

Düzenleme onaylandı tarafından Richard

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[* red] Using a Phillips head screw driver, remove the two screws for the metal plate on the bottom.
[* orange] Detach the smaller ribbon cables by sliding them out.
[* yellow] Detach the large ribbon cable by flipping the small black holder in an upright position and then sliding the cable out carefully.
-[* icon_caution] Detach the ribbon cables slowly and carefully or they ***WILL*** rip.
+[* icon_caution] Detach the ribbon cables slowly and carefully or they will rip.